Welcome to the Podiatry Arena forums

You are currently viewing our podiatry forum as a guest which gives you limited access to view all podiatry discussions and access our other features. By joining our free global community of Podiatrists and other interested foot health care professionals you will have access to post podiatry topics (answer and ask questions), communicate privately with other members, upload content, view attachments, receive a weekly email update of new discussions, access other special features. Registered users do not get displayed the advertisements in posted messages. Registration is fast, simple and absolutely free so please, join our global Podiatry community today!

  1. Have you considered the Clinical Biomechanics Boot Camp Online, for taking it to the next level? See here for more.
    Dismiss Notice
Dismiss Notice
Have you considered the Clinical Biomechanics Boot Camp Online, for taking it to the next level? See here for more.
Dismiss Notice
Have you liked us on Facebook to get our updates? Please do. Click here for our Facebook page.
Dismiss Notice
Do you get the weekly newsletter that Podiatry Arena sends out to update everybody? If not, click here to organise this.

3d Laser Scanners, Veriscan vs. Sharp Shape

Discussion in 'Biomechanics, Sports and Foot orthoses' started by thu331, Sep 10, 2010.

  1. thu331

    thu331 Welcome New Poster


    Members do not see these Ads. Sign Up.
    I was just wondering if anyone has any comments on the above 3d laser scanners. I am looking into getting one but would like to hear other peoples opinions. I tried searching papers on these scanners but haven't found much info.
    The info i did come up with is that both work well but the veriscan is a little bit better. The price difference from the 2 distrubutors i talked to is about $1500 more for the veriscan than the sharp shape. Any info would be much appreciated!

    Thanks
    Tony
     
  2. Craig Payne

    Craig Payne Moderator

    Articles:
    8
    Surely it depends on the lab you are planning to use and if they can accept and use the file from the scanner.
     
  3. robby

    robby Active Member

    Tony,

    Craig is absolutely correct it depends on which lab you plan to use, and wheteher the scans can be used. most scanners export the images as STL files, sharpeshape has its own format and you could be tied into using only one lab.

    check with the lab you plan to use as to what scans they can accept then find out what scanner they sell and see if you can use another lab. 99% of labs that sell scanner will tie you into them.

    In the UK lots of the Labs now have scanners available. check them all there is a price difference, I know that most scanners in the UK are around £3500 sterling to buy, but some Labs will allow payment per pair of orthoses.

    Hope this helps a little.
     
  4. thu331

    thu331 Welcome New Poster

    thanks for the replies,
    the 2 scanners above are from different labs, both if bought out, will not be tied to the lab and can be used at other labs. I'm just wondering if there is any major differences or better outcomes depending on the type of scanner it is.

    Again, the price difference for the scanners vary widely, where the veriscan system being more then $1500 more, so i'm just wondering if it would be worth it in the long run to have it. Any pros and cons for each scanner would be greatly appreciated.

    Thanks
    Tony
     
  5. gaittec

    gaittec Active Member

    Hi Tony,

    Upfront, I need to tell you that I represent a 3D Scanner, Vismach.com or nmotionlab.com to see details.

    But the advice posted above is important. The file formats are not universal and even if you have open permission to send files to other labs, they may or may not
    be able to accept a format you can output. If you want to be totally satisfied, contact a large number of labs you might want to use and ask what formats they can accept.

    Second, you should investigate the advantages of white light projection scanners
    as opposed to laser. They are much faster in capture time and have no moving parts to wear out and are competitively priced.

    By the way, if you want to be totally independent, I will be offering a complete in office lab solution in the next couple of months for as low as 8k depending on options. (Scanner/Software/Milling Machine)

    Best wishes on your search.
     
Loading...

Share This Page