A New Device for Assessing Ankle Dorsiflextion Motion: Reliability and Validity

NewsBot · Apr 1, 2011

Members do not see these Ads. Sign Up.
A New Device for Assessing Ankle Dorsiflextion Motion: Reliability and Validity
Jason Wilken, Smita Rao, Miriam Estin, Charles L. Saltzman, H. John Yack
J Orthop Sports Phys Ther 2011;41(4):274-280

STUDY DESIGN: Clinical measurement.

OBJECTIVE: To determine the validity and reliability of measures obtained using a custom-made device for assessing ankle dorsiflexion motion and stiffness.

BACKGROUND: Limited dorsiflexion has been implicated in the evolution of foot pain in a number of clinical populations. Assessment of ankle dorsiflexion range of motion (ROM) is, therefore, commonly performed as part of a foot and ankle examination. Conventional goniometric assessment methods have demonstrated limited intertester reliability, while alternative methods of measurements are generally more difficult to use. The Iowa ankle range of motion (IAROM) device was designed in an attempt to develop a simple, clinically relevant, and time- and cost-effective tool to measure ankle dorsiflexion range of motion and stiffness.

METHODS: Validity and intertester reliability of dorsiflexion range-of-motion measures using the IAROM device were assessed at 10, 15, 20, and 25 Nm of passively applied dorsiflexion torque, with both the knee extended and flexed approximately 20°. Stiffness (change in torque/change in dorsiflexion angle) values were determined using the angular change obtained between the 15- and 25-Nm torque levels. Convergent validity (n = 12) was assessed through comparison of ankle dorsiflexion angles measured simultaneously with the IAROM device and an optoelectronic motion analysis system. Intertester reliability (n = 17) was assessed by 2 testers who took measurements within the same day.

RESULTS: Validity testing demonstrated excellent agreement (intraclass correlation coefficient [ICC] values ranging from 0.95 to 0.98). Reliability testing demonstrated good to excellent intertester agreement (ICC values ranging from 0.90 to 0.95). The ICCs for ankle joint dorsiflexion stiffness were .71 and .85 for the knee in an extended and flexed position, respectively.

CONCLUSION: The IAROM device provides valid and reliable measurement of ankle dorsiflexion ROM. The IAROM device also allows calculation of stiffness by measuring ROM at multiple torque levels, although the reliability of the measurement is not optimal.
Click to expand...

mike weber · Apr 1, 2011

A New Device for Assessing Ankle Dorsiflexion Motion: Reliability and Validity - full text

I came on to huff and puff about stiffness being more important but they looked at that too. Yippe

Simon Spooner · Apr 1, 2011

I was going to ask if any had a picture of the device. Thanks, Mike. I'll make one of these when I get time.

NewsBot The Admin that posts the news.

mike weber MVP

Simon Spooner MVP

Pre-manufactured orthotic devices

New Foot Device for Hallux Valgus Correction

The FixToe Device for Plantar Plate issues

Comparison of Two Forced-Air Warming Device During Foot and Ankle Surgery

Kinect-based device for 3D scanning of the foot

Vibration device for Plantar Fasciitis

Hard skin bottom of heel from using foot massage device

Share This Page