Fifth Metatarsal Intramedullary Screw Head Cuboid Impingement

NewsBot · Apr 11, 2022

Members do not see these Ads. Sign Up.
Avoiding Fifth Metatarsal Intramedullary Screw Head Cuboid Impingement: A Weightbearing Computed Tomography Anatomic Study
Edgar Garcia-Lopez et al
Foot Ankle Int. 2022 Apr 11

Background: Multiple case reports of fifth metatarsal (MT) intramedullary fixation highlight symptomatic hardware with screw head impingement on the cuboid. We developed a fifth MT intramedullary screw trajectory model using weightbearing computed tomography data. The goal was to assess for cuboid impingement with simulated intramedullary screw position.

Methods: For 20 weightbearing foot computed tomographs (CTs), an automated tool was used to simulate fifth MT screw fixation in the ideal trajectory down the shaft and with a 7-mm screw head. (1) The closest distance from the simulated ideal trajectory to the cuboid in 3 dimensions was measured. A measurement less than 3.5 mm (the radius of the screw head) indicated screw head impingement on the cuboid if not countersunk into the metatarsal. (2) In 3 dimensions, a simulated screw head was then advanced from the proximal tip of the metatarsal distally into the metatarsal until it was entirely avoiding the cuboid.

Results: In this model, 95% (19/20) of the patients would have cuboid impingement if the screw was not countersunk. The average ideal pin start distance was 0.15 mm (SD 2.4 mm) inside the cuboid. In this cohort, the screw head would have to be countersunk an average of 8.1 mm (SD 2.7 mm) relative to the proximal tip of the metatarsal to avoid cuboid impingement. For all cases, the simulated fluoroscopic oblique view was a reliable indicator of cuboid impingement, demonstrating visible overlapping of the screw with the cuboid. The overlap resolved on the oblique foot view once the screw was sufficiently countersunk, confirmed on 3-dimensional imaging.

Conclusion: The ideal guidewire placement for fifth MT intramedullary fixation is directly against the cuboid. Approximately 95% of patients would have cuboid impingement if the screw is not countersunk. The oblique fluoroscopic view of the foot is a reliable assessment of screw head impingement on the cuboid.
Click to expand...

NewsBot · Apr 11, 2022

Related Thread:
Proximal fifth metatarsal fractures

NewsBot The Admin that posts the news.

NewsBot The Admin that posts the news.

Fifth Metatarsal Fracture 23 wks later

Fifth metatarsal head inflammation and pain

Refractory Symptomatic Fourth and Fifth Tarsometatarsal Joints

Foot Orthotics and Intrinsic Factors on Strain Measurements in the Fifth Metatarsal

Dancer’s fracture of fifth metatarsal

Broken Fifth Metatarsal - When can I remove the Boot!

Broken Fifth Metatarsal

Share This Page