During typical human walking, the metatarsophalangeal joints undergo flexion/extension, which we term toe joint articulation. This toe joint articulation impacts locomotor performance, as evidenced by prior studies on prostheses, footwear, sports and humanoid robots. However, a knowledge gap exists in our understanding of how individual toe properties (e.g., shape, joint stiffness) affect bipedal locomotion. To address this gap, we designed and built a pair of adjustable foot prostheses that enabled us to independently vary different toe properties, across a broad range of physiological and non-physiological values. We then characterized the effects of varying toe joint stiffness across a range of different ankle joint stiffness conditions, and different toe shapes on walking biomechanics. Ten able-bodied individuals walked on a treadmill with prostheses mounted bilaterally underneath simulator boots (which fixated their biological ankles). We collected motion capture and ground reaction force data, then computed joint kinematics and kinetics, and center-of-mass (COM) power and work. To our surprise, we found that varying toe joint stiffness affected COM Push-off dynamics during walking as much as, or in some cases even more than, varying ankle joint stiffness. Increasing toe joint stiffness increased COM Push-off work by up to 48% (6 J), and prosthetic anklefoot Push-off work by up to 181% (12 J). In contrast, large changes in toe shape had little effect on gait. This study brings attention to the toes, an aspect of prosthetic and robotic foot design that is often overlooked or overshadowed by design of the ankle. Optimizing toe joint stiffness in assistive and robotic devices (e.g., prostheses, exoskeletons, robot feet) may provide a complementary means of enhancing Push-off or other aspects of locomotor performance, in conjunction with the more conventional approach of augmenting ankle dynamics. Future studies are needed to isolate the effects of additional toe properties (e.g., toe length).
Click to expand...